Simplifying the mechanical method of diamond pads + water

New guides for refurbishing and cleaning floors

To simplify the method of mechanically refurbishing, deep cleaning and maintaining floors using diamond pads and just water The Preparation Group has produced two new guides. The Floor Refurbishment Guide and Floor Cleaning Guide both clearly show which Surface Finishing (SFDs) and Storm Diamond Pads to use by floor type and condition and the result that will be achieved.

There are solutions to tackle soiled, stained, scratched and heavily trafficked; vinyl, linoleum, marble, natural stone, terrazzo, resin, floor coatings, wood, polished concrete, screeds and granite e.g. to deep clean soiled or lightly stained terrazzo tiles, a 400 Storm Pad would give a sheen finish. To polish a heavily scratched hard natural stone, a 50 SFD followed by a 100 SFD would give a surface suitable for application of a thick seal.

Storm Diamond Pads are a range of diamond infused, specialist cleaning pads designed to fit all Scrubber Dryers, Rotary Cleaners and Burnishers along with the STG450 & STG400. SFDs have resin dots bonded onto the pads for grinding, keying and polishing floors. They fit rotary cleaning machines and the STG range.

Says Tracey Glew, Managing Director; ‘Storms are a denser pad and are double sided so they clean quicker, last longer and are cheaper in operation. SFDs are an all in one solution to refurbish and renew floors. Both offer a simple system as the guides demonstrate, with no confusing colours just simple grades from coarse to extra fine.’

New guides for refurbishing and cleaning floors
Contact Subscribe