For cleaning and scrubbing hard surfaces

New brushes for STG machines

The Preparation Group, specialists in environmentally friendly solutions for preparing, cleaning & finishing, has launched a new range of brushes to fit and extend the applications of the STG400 and the original STG450 multi-purpose machines. There are four different options, a Nylon Brush Plate, a Wire Brush Plate and for the STG450 only, 3 x 8’’ brushes that fit onto a metal drive plate in Coarse Wire or Crimped Wire.

The Nylon Brush Plate available for both machines, is designed to clean and scrub hard surfaces; resin, terrazzo, marble, natural stone, paving, concrete and vinyl. Nylon is flexible and so lasts longer than polypropylene equivalents. The plate can be used with cleaning products or degreasing solutions but for an environmentally friendly clean, just add water. The Wire Brush Plate is for cleaning oily, dirty concrete and steel, scarifying concrete and removing carpet backing from concrete floors.

The 8’’ Coarse Wire Brushes are heavy duty, for removing oil, dirt, rust, crud and scale from steel surfaces and for scarifying concrete. The 8’’ Crimped Wire Brushes are medium duty, suitable for general cleaning and scarifying of concrete and for cleaning steel chequer plates.

The brushes join the interchangeable copper discs, sanding discs and cleaning pads available for both machines, providing a total solution for floor refurbishment and deep restorative cleaning. 

For a demonstration of the multi-functional STG400, STG450 or of the new brushes in action, call +44(0)1522 561460. Click here for further information.

New brushes for STG machines
Contact Subscribe