Shotblasters
The method of shotblasting involves steel abrasive, or shot, being propelled at high
velocity onto the designated surface to create an infinite range of profiles (textures).
You would select shotblasting to clean and texture concrete, asphalt or tiled surfaces,
creating adhesion for the application of a wide range of surface finishes, to remove paints
and sealants, to prepare steel, or to key bridge decks and roads for surface dressing and
waterproof systems.
The level of profile is determined by the speed at which the machine is operated and the
grade of steel abrasive selected. The debris is collected in the “collector” – a vacuum unit
for disposal, and the shot reclaimed for continued use.
The Preparation Group offers a range of high performance, reliable and operator friendly
shotblasting machines together with accessories & spares. The type and size of the
machine selected will determine production rates achievable and degree of profiling
required for the specified material to be applied.
| PPC215 - Shotblasting Machine | ||
 |
Smallest machine in the range. Available in 110v or 415v. Simple, compact design. 110v - Download Product Specification (pdf) 415v - Download Product Specification (pdf) |
|
| PPC265 - Shotblasting Machine | ||
 |
Ideal for small to medium sized projects with restricted access. Supplied with filtration unit. Download Product Specification (pdf) |
|
| PPC400 - Shotblasting Machine | ||
 |
Designed for medium to large sized projects. Supplied with filtration unit. Download Product Specification (pdf) |
|
| PPC558 - Shotblasting Machine | ||
 |
Ideal for large projects where high levels of productivity are required. Supplied with filtration unit. Download Product Specification (pdf) |
|
| PPC1600 - Ride-on Shotblasting/Planing Machine | ||
 |
Fully self contained machine with no cables, suited to prepare large open areas. Download Product Specification (pdf) |
|
| Key Accessories | ||
 |
Shot Steel abrasive used to create the surface profile. Available in 5 grades. |
|
 |
Tuning Kit Propels shot onto the floor. |
|
 |
Liners Wear plates. Available in Top, Left, Right and Middle. |
|
 |
Magnet Collects and retains shot. |
|
 |
Skid Seal Creates a seal against the floor at the back of the machine. |
|
 |
Brush Seal Provides a seal against the floor at the front and side of the machine. |
|
| Also Recommended | ||
 |
Magnetic Sweeper Collects steel abrasive or ‘shot’ after shotblasting. |
|
For advice, a no obligation quotation or to order machines, accessories & spares e-mail sales@ppcgroup.co.uk or call 01522 561460.
